NEW for 2011!
Our Ebb & Flow Controller is a ready-to-use, customizable, modular, wall-mounted unit.
controller gives you the flexibility to select the control container and
watering levels that YOU want for your ebb and flow hydroponics system.
Just follow the instructions to mount the float switches in a bucket you
select, plug each float switch into the controller using the color-coded
connectors, mount the controller on the wall, plug your pumps into the
controller and plug the controller into a household outlet.
timer to the current time and depress the tabs for each 15-minute watering
cycle you want. The controller will flood your container from a
reservoir until it reaches the high level you set during assembly.
When the 15 minutes is up (or longer if you select multiple tabs), the
controller will empty your control container back into your reservoir.
Does not include
reservoir, planters, pumps, control container, fittings, tubing to connect
planters to your control container, etc. Customize all of these
elements as you desire. Our controller is a ready-to-use brain for
your system. Use it to fill and drain any container at set times of
Five sturdy horizontal-mount float
switches provide better flow-management than two-float systems.
Redundant high-level float switch to
protect against overflows.
GFCI-ended cord for safety.
Detailed instructions -
assembles in about 15 minutes.
Please read our
Terms & Conditions.
Note that this is not a complete ebb & flow system - this is the control system for an ebb & flow hydroponics set-up only.
Please consult the web or your local hydroponics store to learn more about
connecting planters to your control system, using and sizing a reservoir,
sizing and sources of pots, etc.